Choosing And Modifying D-SLR Lenses

Posted by Mamas_Wae On Sunday, June 22, 2014 0 comments
Normally when you buy a D-SLR digicam, it comes out with a lens or contacts, but you are not restricted to using only them. D-SLR cameras have a extensive range of contacts created for them, but there are problems. In this article, we will talk about the factors you need to know to make the right lens choice and how to modify them correctly.

When you buy a D-SLR digicam for your professional photography business, you will have the capability to use different kinds of contacts which can offer you two things: access to quality contacts and remarkable versatility.

Specialist Contacts For D-SLR Cameras:

You will be able to buy professional contacts that allow you to stretch the capability of your digicam. On D-SLR cameras, exchangeable contacts allow you to quickly eliminate a lens and fit another with a different central duration. Let's take a look at how you are supposed to modify a lens on a D-SLR digicam.

D-SLR cameras use exchangeable contacts that are created for their specially created brands. Canon for example uses one kind of install and lens. Nikon on the other hand uses a different kind. Then you get different manufacturers that make contacts to fit on different kinds of D-SLR models.

These kinds of contacts are developed in such a way to capture specific scenes, such as portraiture where a lens is developed to offer a suitable central duration with a blurred background. It can also offer an option for macro (close-up) photos and take wide-angle photos. In every kind of scene, each lens can perform its function to a greater or lesser degree.

Changing Your Interchangeable Lens:

To modify a lens on your D-SLR digicam is not that difficult, but there are good and bad ways of changing them. Keep in mind the following factors when you are changing a lens:

Before you decide to eliminate a lens from your digicam, ensure that you have switched it off.
You will find index spots on your digicam and on your lens that you can use when changing a lens. Line these spots up with one another.
First, insert the lens base into the install and convert the lens counter-clockwise until you hear a click which will then lock the lens in place. When you press the lens release button on your digicam whole body, it will allow you to convert the lens clockwise and eliminate it.

There is a threat on letting dirt enter the digicam every time you modify a lens. The dirt will lie on the low-pass filter, which would be at the front side of the picture indicator. This would be the result of getting photos with black or gray spots on it. To avoid dirt falling on your picture indicator, you need to minimize the exposure to the inside of the digicam whole body.

Have the lens that you want to modify ready to go before you take the current lens from the digicam. If you leave the digital camera's power on, you will threat creating static electricity that would attract dirt to the picture indicator. Shield your digicam from the wind, rain and dirt with your back as these components could possibly blow into the digicam very quickly. When you handle a lens, feel, as this the back and front side components to avoid finger prints. Rather grasp the lens barrel. I always use front side and back lens caps to protect the lens. Practice these techniques at home before you do a capture.



0 comments:

Post a Comment